Kilworth Volcan K105 SDT RS Tractor

KILWORTH

The Volcan is the largest All Terrain Tractor within the BCS range. It has the reverse drive system as standard and is available with a choice of 3 engines up to 92HP. Although engine power is high, the tractor remains compact and weighs only approximately 2150kg with the optional cab. It is suitable for a range of tasks from estate maintenance and forestry through to contract mowing on roadside verges and embankments

Weight 2700 kg
Brands

KILWORTH

Brand Kilworth
Engine KUBOTA V3800 CR-TE4
Number of cylinders 4 in-line
Displacement (cm³) 3769
Intake Turbo
Fuel system Direct injection “Common rail”
Emission level Stage 3B
Balancing Counter-balance shafts
Power (kW/HP) 72.1 / 98
Rated speed (rpm) 2,400
Maximum torque (Nm/rpm) 330 / 1,500
Speed management Electronically regulated with a consolle with functions: increase and decrease of engine speed, memorize
and recall a particular speed or switch off the electronic throttle and go to the minimum idle speed
Cooling Liquid
Tank capacity (lt) 70 lt (version with roll-bar) – 54 lt (version with cabin)
Chassis Swinging integral chassis OS-FRAME with steering wheels
Drive Four-wheel drive. Front-wheel drive disengagement with electro-hydraulic control
Transmission 32 speeds synchronized gearbox: 16 FWD and 16 REV with synchronized reverser
Power Shuttle Easydrive (Optional) Electro-hydraulic power shuttle electronically actuated with the lever (with 3 position FWD-N-REV) installed on the left of steering wheel.
Possibility to choose from 5 levels of reactivity
Transmission clutch Multidisc in oil bath electronically-managed and proportional hydraulic control with PRO-ACT System
Differential Front and rear. Differential lock: front and rear simultaneously or only rear with electro-hydraulic control
Axles Front with epicyclic reduction units and rear with bull-gear units. Front axle, oscillating in the middle (approx. ±15°)
Rear PTO Independent from the gearbox and synchronized with forwarding speed. Engageable under load with brake in disengaged position
PTO Clutch Multidisc in oil bath with electro-hydraulic control
PTO rotation speed (rpm) Standard: 540/540E – Optional: 540/1,000
Hydraulic System Double circuit with independent pumps and heat exchanger
Flow rate to the hydroguide and the electro-hydraulic controls (lt/min) 33
Flow rate to the lift and the control valves (lt/min) 30 (optional oversized pump with flow rate 49 lt/min)
Maximum hydraulic pressure (bar) 180
Rear Control Valves Mechanical control
Standard 2 double acting
Optional and in addition to the standard ones 1 single acting and 1 double acting or 1 double acting and 1 double acting with float
Joystick (optional) With proportional electronic control of lifts and control valves consisting of: 1 single acting with adjustable flow and free return, 3 double
acting (replacing the standard ones) and oversized pump 49 lt/min. Potentiometer to change the sensibility of the joystick
Front Control Valves (Only with Joystick) 4 double acting, 1 single acting and 1 single acting with adjustable flow and free return with E-Plug System
Electric System Battery 100 Ah / 12 V – Alternator 95 A
Rear power outlets 7 pin and 3 pin
Rear Lift Standard: by two external rams Optional: position and draft control
Three-point hitches Standard: standard couplers cat. 1 and 2. Optional: quick couplings cat. 1 and 2, arms with non-adjustable length or quick couplings,
L-shaped, cat. 1 and 2, arms with adjustable length and hooks with adjustable width
Three-point tie bar Standard: with manual adjustment – Optional: hydraulically controlled upper link and tie rod link arm
Ball joint lifting capacity (kg) 2,700
Front Lift (Optional) With front protection and 2 double acting control valves with free return
Three-point hitches Rigid with quick couplings cat. 1
Lifting capacity (kg) 800
Driving Platform Monodirectional with platform suspended on silent block. Suspended pedals mounted on control column
Steering wheel With adjustable inclination
Seat with gas spring for easy tipping and safety belt Standard: comfortable sprung seat, adjustable according to the driver’s weight – Optional: “Kab Seating” or pneumatic seat
Service Brakes Oil bath discs with hydrostatic control, acting on the four wheels
Parking brake Standard: acting on the rear transmission, with hand lever – Optional: automatic and indipendent Brake-Off with knob on the dashboard
Steering Hydrostatic steering acting on the front wheels
Safety Standard: front homologated roll-bar
Cabin (Optional) Compact AIRTECH version, pressurised and homologated cat. 4. Sound-proof with monocoque body fitted on silent-block, beacon lamp
and fabric covered seat. Safety cell integrated in the structure, instrument panel and air ducts (car type).
Air conditioning system and Brake-Off
Instrument Panel With multi-function colour and digital display complete with: hour counter, battery voltage, fuel consumption, DPF level,
simultaneous reading of engine speed, forwarding speed and PTO speed. Warning lights and acoustic alarm
Standard Tyres 260/70R16*300/70R20
Optional Tyres 260/70R16*340/65R20 – 280/70-18*360/70R20 – 280/70-18*320/70R24 – 320/65R18*380/70R20 – 340/65R18*420/65R24
Standard Tow Hooks Rear CUNA and front
Optional Tow Hooks Rear tow hook: EC approved or EC approved (Slider type) or CUNA (Slider type)
Weight With Roll-Bar (kg) 2,520
Weight With Cabin (kg) 2,700
Optional Front bumper, Beacon lamp, Front weight, Weights for front wheels, Cast-iron rim flanges for rear wheels 24”,
Front plate for implements connection, Active carbon filter for pressurised cabin