No products in the cart.
-11%
Battery Powered, Hedge Cutters & Trimmers
Cobra HT50LRH24V Battery Powered Trimmer
The Cobra HT50LRH24V is a versatile 2-in-1 cordless hedgetrimmer that can function as either a standard hedgetrimmer, or a long reach hedgetrimmer. It has a 50cm double sided blade with a tooth spacing of 20mm and comes with a 24v Li-ion battery.
£119.99 £134.99
Double sided cutting blade – Precise cutting every time with Cobra
The HT50LRH24V cordless hedge trimmer from Cobra comes with a 50cm double sided reciprocating cutting blade, with a large 15mm tooth spacing.
Double sided blades are more suitable for shaping, as you can alter the direction of the cut without moving around as much and with its extra versatility, the HT50LRH24V hedge cutter is perfect for domestic gardens.
Cobra HT50LRH24V – Powered by a 24v Lithium-ion Battery
Compared with traditional battery technology, Cobra Lithium-ion batteries charge faster, last longer,and have a higher power density for more battery life in a lighter package. Cobra’s cordless battery technology opens the door to countless uses, even in places with no electricity.
| Weight | 4 kg |
|---|---|
| Brands | COBRA |
| Brand | Cobra |
| Battery | 1 x 24v 2.0Ah Lithium-Ion |
| Charge Time | 2 hours |
| Cutting Length | 500mm / Extension 1 meter |
| Cutting Width | 20mm |
| Speed | 1400rpm |
| Dual Blade Movement | Yes |
| Dual Handle Switch | Yes |
| Articulate Range | 90° |
| Domestic Warranty | 2 Years |
Related products
- Brush Cutter, Handhelds, Hedge Cutters & Trimmers
STIHL FS 56 C-E Brush Cutter
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Bike handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
Basic harness
For use with loop handle machinesAccessories
DuroCut mowing head
Double or quadruple lines, for mowing and thinning work. Up to four lines can be easily inserted. Compatible with many different sizes and types of mowing line
Line pieces for DuroCut mowing head
Replacement line pieces for DuroCut mowing head
Plastic blades for PolyCut 6-3, 20-3, 41-3
Replacement plastic blades for PolyCut mowing head 6-3, 20-3, 41-3, set of 12 white blades
Grass cutting blade (2 blades)
Steel double blade, reversible. For working on areas of tough grassSKU: n/a - Hedge Cutters & Trimmers, Tillers
STIHL HS 82 RC-E Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions ​​with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
Double-sided blades
Dual ground blade system provides a clean cut. Excellent for cutting stronger, thicker branches.
Cutting variation (R)
The R variations of the STIHL HS 82 and STIHL HS 87 are designed specifically for large volume cutting. They feature a cutting blade with wide tooth spacing and longer tooth height. The gearing allows a high cutting power at a medium stroke rate. The R variations provide the possibility of cutting thicker branches and completing clearing work faster.
Swivelling multi-function handle
The handle rotates by 90° to the left and right, ensuring the best cutting position at all times.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Suspension lug in handle
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Double-sided cutting blade
The cutting blade is double sided. The sophisticated blade geometry makes for a job well doneSKU: n/a
