Brush Cutter
Showing 1–24 of 169 results
-
-
Brush Cutter
DANARM VS400W-TLE33 Brushcutter
Fitted with a 33cc Mitsubishi engine, this model is suitable for use on thick vegetation and for large areas. The ergonomic handlebars and full padded harness with hip pad make it a comfortable machine to use. It is supplied with a tap & go head and 3-tooth blade.
SKU: n/a -
Brush Cutter, Handhelds
DANARM VS256S-TLE27 Brushcutter
The well proven VS256 shaft is now fitted with the TLE27 engine. This engine conforms to the latest EU emission regulations. Two attachments from the multi-tool range are available to make this machine into a long reach hedgetrimmer or long reach chainsaw pruner.
SKU: n/a -
Brush Cutter, Handhelds
Echo SRM-3611T/U U-Handle Brushcutter
The 36.3cc SRM-3611T double-handle brushcutter features a high torque head. With a 1:1.62 gear reduction ratio, it generates outstanding levels of torque – up to 50% more than previous models.
More torque means more cutting performance and by installing thicker line, the user can tackle a wider range of tasks with just one brushcutter. Featuring a comparatively small engine, the unit is lightweight and features low levels of vibration, but has the cutting performance of a higher-capacity machine.
The SRM-3611T’s engine combines the best features of 4-stroke and 2-stroke engines: stable cutting performance in heavy working conditions; low noise and low emissions; runs with mixed fuel, meaning there’s no need to check oil levels; can be operated in any position.
SKU: n/a -
Brush Cutter Accessories
STIHL Guards For Metal Tools
Protection against flying cuttings.
Guard for metal mowing tools, Ø 260mm for FSA 90
Guard for metal mowing tools, Ø 230mm for FS 55 / FS 56 / FS 70
Guard for metal mowing tools, Ø 305mm for FS 360 / FS 410 / FS 460 / FS 490
Guard for metal mowing tools, Ø 350mm for FS 560
Guard for metal mowing tools, Ø 305mm for FS 460 K
SKU: n/a -
Battery Lithium Ion, Brush Cutter, Handhelds
STIHL FSA 86 R Battery Powered Brush Cutter
STIHL FSA 86 R Is a powerful cordless brushcutter in a contemporary design for mowing along the side of obstacles, as well as around trees and bushes. Cutting circle diameter 350 mm. Ergonomic operating handle, loop handle, sturdy aluminium shaft, spacer bracket.
SKU: n/a -
Brush Cutter, Handhelds
Echo SRM-520ESU Brushcutter
Built for professionals, the SRM-520ESU is a highly durable U-handle brushcutter, for the toughest applications. Featuring a powerful 50.2cc two-stroke engine, the ECHO SRM-520ESU starts effortlessly thanks to the Easy Start system.
It is supplied with a trimmer head and blade. It also comes with a padded, easily adjustable harness for quick hook-up and release to the machine.
This product is part of ECHO’s X Series range of “best-in-class” products. Click here to find out more about X Series.
SKU: n/a -
Brush Cutter, Handhelds
DANARM VF500M-TLE48 Brushcutter
The VF500M Brushcutter is designed for professional users as it is comfortable to use and gives very low vibration exposure.
This machine is supplied with full padded harness, 3-tooth blade and tap & go head.
The handlebar can be loosened and turned in line with the shaft for ease of transportation.
The TLE48 Mitsubishi engine gives enough power to tackle any job
SKU: n/a -
-
Brush Cutter, Handhelds
STIHL FS 94 RC-E Brush Cutter
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Large fuel tank
The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Loop handle (R)
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
STIHL ECOSPEED
STIHL ECOSPEED enables the user to control the brushcutter engine speed individually on the operating handle.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.Accessories
DuroCut mowing head
Double or quadruple lines, for mowing and thinning work. Up to four lines can be easily inserted. Compatible with many different sizes and types of mowing line
Line pieces for DuroCut mowing head
Replacement line pieces for DuroCut mowing head
Plastic blades for PolyCut 6-3, 20-3, 41-3
Replacement plastic blades for PolyCut mowing head 6-3, 20-3, 41-3, set of 12 white blades
Grass cutting blade (2 blades)
Steel double blade, reversible. For working on areas of tough grassSKU: n/a