Brands | STIHL |
---|
STIHL Rapid Micro (RM) Chainsaw Chain
Good all-round comfort chain with low vibration levels, smooth cutting behaviour and low chatter.
£30.40 – £46.44
Related products
-
Chainsaw, Handhelds
Echo CS-2511WES Chainsaw
0 out of 5(0)Features
- ECHO X SERIES
Part of ECHO’s range of “Best-in-class” products - 25.0CC PREMIUM GRADE ECHO® ENGINE
Increased performance, extended product life and less downtime - EASY START
Spring-assisted starting system for quick, almost effortless starting. Just one or two gentle pulls of the recoil will start the engine. A warm engine will usually start with one half pull of the recoil rope - LOW EMISSIONS
Stage 2 compliant low emission engine means reduced exhaust emissions - TOOL-LESS AIR FILTER COVER
For easy air filter access, even when wearing gloves - INERTIA-TYPE CHAIN BRAKE
A safety feature. Dual-post chain brake handle for increased durability - PALM REST
For manoeuvrability and precise control - SIDE ACCESS CHAIN TENSIONER
Allows easy chain adjustment - DIGITAL C.D.I.
Gives smooth, quick acceleration and stable idle - ANTI-ICING SYSTEM
Stops the carburettor from freezing in colder months - G-FORCE ENGINE AIR PRE-CLEANER
Reduces engine exposure to dirt and debris for less maintenance - MESHED LOUVERS IN BODY
Prevent pine needle and debris penetration - ROTATING CHAIN CATCHER
Protects the user from injury / Prevents chain damage - STARTER GRIP ASSIST CAP OPENER
Helps the user to open the oil/fuel caps, even when wearing gloves - DROPOUT PREVENTION NUT
Held on with wire spring – the nuts can’t be lost during maintenance - OILER ADJUSTMENT ON TOP
Enables easier operator access - WIDER TANK OPENINGS
For easy oil/fuel refilling - OPTIONAL DEBRIS SHIELD AND SNOW SHIELD AVAILABLE
Prevents debris and snow penetration - WARRANTY
ECHO power tools come with a two year warranty in professional use or five year domestic use (registration of ECHO products and servicing are necessary to validate the warranty)
SKU: n/a£389.00£449.00 - ECHO X SERIES
-
Chainsaw, Handhelds
STIHL MS 201 C-M Chainsaw
0 out of 5(0)Combi lever
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
STIHL M-Tronic (M)
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed – even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
Captive nuts
When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.
Variable-displacement oil pump
Allows a precise, demand-based delivery of oil. It’s possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Ematic chain lubrication system
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user’s joints and muscles through a spring or rubber element in the starter handle.
Tool free filler caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for toolsSKU: n/a£785.00 – £795.00 -
Chainsaw, Handhelds
STIHL MS 391 Chainsaw
0 out of 5(0)Decompression valve
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.
Variable-displacement oil pump
Allows a precise, demand-based delivery of oil. It’s possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.
Single-lever master control
All important functions such as start, choke, throttle and stop are operated via a single lever.
Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Ematic chain lubrication system
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
Tool free filler caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.SKU: n/a£785.00 – £806.00 -
Chainsaw, Handhelds
Echo CS-362WES Chainsaw
0 out of 5(0)Features
- 35.8CC PREMIUM GRADE ENGINE
Increased performance / extended product life / less downtime - CHROME PLATED CYLINDER
For enhanced durability - EASY START
Spring assisted starting system for quick, almost effortless starting. Just one or two gentle pulls of the recoil will start the engine. A warm engine will usually start with one half pull of the recoil rope - LOW EMISSIONS
Stage 2 compliant low emission engine means reduced exhaust emissions - TOOL-LESS AIR FILTER COVER
For easy air filter access, even when wearing gloves - SIDE ACCESS CHAIN TENSIONER
Enables easy chain adjustment - DIGITAL C.D.I.
Gives smooth, quick acceleration and stable idle - INERTIA CHAIN BRAKE
For safety - REPLACEABLE METAL BUMPER SPIKE
For improved control - NARROW LOUVERS IN BODY
Prevent pine needle and debris penetration - WARRANTY
ECHO power tools come with a five year domestic warranty or a two year warranty in professional use (registration of ECHO products and servicing are necessary to validate the warranty)
SKU: n/a£389.00£449.00 - 35.8CC PREMIUM GRADE ENGINE