[15% Discount]
Showing 25–48 of 116 results
- Cut-off Machines
STIHL TS 410 Petrol Cut-off Machine
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Water supply
Water is supplied to the cutting wheel through the standard water connection with sprinkler system to suppress the dust produced during cutting. It is supplied to the device in such a way so as not to interfere with your work.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Ergonomic grip position
The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.
Semi automatic drive belt tensioning
Light, consistent re-tensioning increases the service life of the belts and shaft bearingsSKU: n/a - Mist Blowers
STIHL SR 450 Backpack Mistblower
STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user’s joints and muscles through a spring or rubber element in the starter handle.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Carrying system
Mistblowers are equipped with a practical carrying system. Weight is evenly distributed across the shoulders and back to ensure maximum user comfort.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
14-litre tank with large filler opening
The 14-litre container offers exceptional capacity. You can work for longer before having to refill. Filling is quick and clean with the large filler opening. Spillages are kept to a minimum and the container is easy to clean.
2-in-1 conversion mechanism
The universal SR 450 can be switched easily from spraying to dusting at the turn of a handle. No need for a separate conversion kit or specialist technical skills.
Grid
With the three grids that you can assemble, you can change the spray jet’s shape and direction. Taper grids, diffraction grating and double diffraction grating are standard features.
Metering system with easy metering lever
The large metering lever for dusting or spraying granules is just below the control handle. With just one movement, you can switch the flow of powder on and off, and set the exact concentration in fine intermediate stages.SKU: n/a - Blowers, Handhelds
STIHL SH 86 C-E Vacuum Shredder
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
HD2-Filter
The HD2 filter, made from polyethylene filter material, has pores that are up to 70% finer than those of fleece and polyamide filters and therefore eliminates even the finest dust. In addition, it repels oil and water and is therefore very easy to clean. The PET filter cartridge can be removed and inserted without tools.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Throttle lock with built-in stop switch
The running machine switches off immediately after a brief press of a button. Once the machine is at a standstill, the ignition activates again automatically, meaning it is always ready to start.
One handle control with soft grip area
For a secure and comfortable grip.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Integrated shoulder strap for vacuum bag
The integrated shoulder strap makes vacuuming for long periods of time less tiring. Allowing for much more movement whilst helping to support the weight of the collection bagSKU: n/a - Blowers
STIHL SH 56 C-E Vacuum Shredder
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Catalytic converter (D)
Considerably reduces the quantity of harmful particles in the exhaust gas.
Manual fuel pump (purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Multi-function control handle
This houses all the engine controls. Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Integrated shoulder strap for vacuum bag
The integrated shoulder strap makes vacuuming for long periods of time less tiring. Allowing for much more movement whilst helping to support the weight of the collection bagSKU: n/a - Backpack Blower, Handhelds
STIHL BR 700 Backpack Blower
STIHL 4-MIX® engine
You can always rely on STIHL to keep setting new benchmarks this time with 4-stroke mixed lubrication technology. The STIHL 4-MIX® engine, which runs on a fuel-oil mix just like a 2-stroke, offers the benefits without the compromises of 4-stroke power. STIHL 4-MIX® engine technology provides fast acceleration, more power, added torque, lower noise, reduced emissions and increased fuel efficiency to complete jobs quickly and more easily.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Ergonomic harness with hip belt
The ergonomic harness with hip belt offers carrying comfort, with height and strap adjustment. The hip belt also aids comfort when working for prolonged periods of time.
Toolless handle position adjustment
The handle position can be quickly adjusted without tools to suit the operator.
Adjustable blowing tube
The blowing tube can be easily adjusted, without tools, to suit individual body sizes or individual cleaning task. This allows for optimum blowing force and control at all timesSKU: n/a - Backpack Blower, Handhelds
STIHL BR 600 Backpack Blower
STIHL 4-MIX® engine
You can always rely on STIHL to keep setting new benchmarks this time with 4-stroke mixed lubrication technology. The STIHL 4-MIX® engine, which runs on a fuel-oil mix just like a 2-stroke, offers the benefits without the compromises of 4-stroke power. STIHL 4-MIX® engine technology provides fast acceleration, more power, added torque, lower noise, reduced emissions and increased fuel efficiency to complete jobs quickly and more easily.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Ergonomic harness with hip belt
The ergonomic harness with hip belt offers carrying comfort, with height and strap adjustment. The hip belt also aids comfort when working for prolonged periods of timeSKU: n/a - Backpack Blower, Handhelds
STIHL BR 500 Backpack Blower
STIHL 4-MIX® engine
You can always rely on STIHL to keep setting new benchmarks this time with 4-stroke mixed lubrication technology. The STIHL 4-MIX® engine, which runs on a fuel-oil mix just like a 2-stroke, offers the benefits without the compromises of 4-stroke power. STIHL 4-MIX® engine technology provides fast acceleration, more power, added torque, lower noise, reduced emissions and increased fuel efficiency to complete jobs quickly and more easily.
Built-in sound damper
The BR 500 with built-in sound damper is built for use in noise-sensitive areas. The measured noise reduction for the human ear is up to 59% compared to the previous model** Despite the relatively low noise emission, the BR 500 is a strong, reliable helper with high performance. **Measured according to EN-ISO22868.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Ergonomic harness
Evenly distributes the weight between the user’s shoulders, back, hips and upper thighs. With soft padding for increased comfort during prolonged use and when working on large areasSKU: n/a - Backpack Blower, Handhelds
STIHL BR 450 C-EF Backpack Blower
STIHL 2-MIX Engine
The 2-stroke engine with 2-MIX technology offers impressive engine performance, outstanding performance and excellent volume torque curve for high cutting performance and pulling power. Despite its power, the engine operates with low emissions so the engine already meets the requirements EU emissions standard Stage II.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Toolless handle position adjustment
The handle position can be quickly adjusted without tools to suit the operator.
Adjustable blowing tube
The blowing tube can be easily adjusted, without tools, to suit individual body sizes or individual cleaning task. This allows for optimum blowing force and control at all times.
STIHL ErgoStart (E)
The STIHL ErgoStart makes starting the tool more convenient by enabling a smooth, even pull. The start-up sequence benefits from an additional spring between the crankshaft and start-up mechanism making the whole procedure less strenuous. Even a gentle pull of the starter cord effortlessly starts up the engine.
Electrostart (F)
Thanks to Electrostart, users can restart the tool quickly and easily at the push of a button − without having to take it off their backs first. This saves them extra hassle and is the perfect solution for short breaks. The lithium-ion battery is recharged while the tool is in useSKU: n/a - Backpack Blower, Handhelds
STIHL BR 430 Backpack Blower
STIHL 2-MIX Engine
The 2-stroke engine with 2-MIX technology offers impressive engine performance, outstanding performance and excellent volume torque curve for high cutting performance and pulling power. Despite its power, the engine operates with low emissions so the engine already meets the requirements EU emissions standard Stage II.
STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user’s joints and muscles through a spring or rubber element in the starter handle.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Ergonomic harness
Evenly distributes the weight between the user’s shoulders, back, hips and upper thighs. With soft padding for increased comfort during prolonged use and when working on large areasSKU: n/a - Backpack Blower, Handhelds
STIHL BR 350 Backpack Blower
STIHL 2-MIX Engine
The 2-stroke engine with 2-MIX technology offers impressive engine performance, outstanding performance and excellent volume torque curve for high cutting performance and pulling power. Despite its power, the engine operates with low emissions so the engine already meets the requirements EU emissions standard Stage II.
STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user’s joints and muscles through a spring or rubber element in the starter handle.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Ergonomic harness
Evenly distributes the weight between the user’s shoulders, back, hips and upper thighs. With soft padding for increased comfort during prolonged use and when working on large areasSKU: n/a - Backpack Blower, Handhelds
STIHL BR 200 Backpack Blower
STIHL 2-MIX Engine
The 2-stroke engine with 2-MIX technology offers impressive engine performance, outstanding performance and excellent volume torque curve for high cutting performance and pulling power. Despite its power, the engine operates with low emissions so the engine already meets the requirements EU emissions standard Stage II.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Ergonomic harness
Evenly distributes the weight between the user’s shoulders, back, hips and upper thighs. With soft padding for increased comfort during prolonged use and when working on large areasSKU: n/a - Blowers, Handhelds
STIHL BG 86 C-E Hand Held Blower
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
HD2 Filter
The HD2 filter, made from polyethylene filter material, has pores that are up to 70% finer than those of fleexe and polyamide filters and therefore eliminates even the finest dust. In addition, it repels oil and water and is therefore very easy to clean. The PET filter cartridge can be removed and inserted without tools.
One handled control with soft grip area
For a secure and comfortable grip. The integrated anti-static system counters electrostatic charging.
Throttle lock with built in stop switch
The running machine switches off immediately after a brief press of a button. Once the machine is at a standstill, the ignition activates again automatically, meaning it is always ready to start.
Anti-vibration system
Intense vibration at the handles of power tools can lead to longer-term effects of blood vessels in the hands and arms. STIHL have therefore developed an effective anti-vibration system where by the oscillations from the machines engine are dampened which significantly reduces vibrations at the handles allowing for more comfortable and safer operation.
Safety glasses
The standard protection glasses for your safety. The glasses are well ventilated and have a wide side protection.SKU: n/a - Blowers, Handhelds
STIHL BG 66 C-E Hand Held Blower
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Catalytic converter
Considerably reduces the quantity of harmful particles in the exhaust gas.STIHL ErgoStart (E)Zoom
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
One handled control with soft grip area
For a secure and comfortable grip. The integrated anti-static system counters electrostatic charging.
Throttle lock with built in stop switch
The running machine switches off immediately after a brief press of a button. Once the machine is at a standstill, the ignition activates again automatically, meaning it is always ready to start.
Low noise sound damper
The BG 66 C-E with built-in sound damper is built for use in noise-sensitive areas. The measured noise reduction for the human ear is up to 35% compared to the previous model.** Despite the relatively low noise emission, the BG 66 C-E is a strong, reliable helper with high performance. ** Measured according to EN-IS022868.
Anti-vibration system
Intense vibration at the handles of power tools can lead to longer-term effects of blood vessels in the hands and arms. STIHL have therefore developed an effective anti-vibration system where by the oscillations from the machines engine are dampened which significantly reduces vibrations at the handles allowing for more comfortable and safer operationSKU: n/a - Hedge Cutters & Trimmers
STIHL HL 94 C-E Long Reach Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
STIHL Ecospeed
With the ECOSPEED function, you can use your long reach hedge trimmer in a more economical operating mode. Simply turn the wheel to the minus direction, thereby reducing the maximum engine speed. This keeps your long reach hedge trimmer running at partial load; however, despite this limited setting, you can shift to full capacity when necessary by pressing the throttle lever. Operating at partial load reduces fuel consumption and you can work much longer with one tank.
Blade system
Double-sided cutting blades ensure a powerful and precise cut even through thicker branches.
Quick-release adjustment system
The cutter bar can be adjusted in increments up to 145° in two directions. To save space, the cutter bar can be folded parallel to the shaft, and locked, for transport.
Loop handle
The loop handle gives you maximum flexibility and easy operation even in confined working conditions.
Clip
The clip for the belt is rotatable, making the tool easier to manoeuvre.
Manual fuel pump (purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Shoulder strap / carrying system
Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.SKU: n/a - Hedge Cutters & Trimmers
STIHL HL 92 KC-E Long Reach Hedge Trimmer
STIHL Ecospeed
With the ECOSPEED function, you can use your long reach hedge trimmer in a more economical operating mode. Simply turn the wheel to the minus direction, thereby reducing the maximum engine speed. This keeps your long reach hedge trimmer running at partial load; however, despite this limited setting, you can shift to full capacity when necessary by pressing the throttle lever. Operating at partial load reduces fuel consumption and you can work much longer with one tank.
Blade system
Double-sided cutting blades ensure a powerful and precise cut even through thicker branches.
Quick-release adjustment system
The cutter bar can be adjusted in increments up to 145° in two directions. To save space, the cutter bar can be folded parallel to the shaft, and locked, for transport.
Clip
The clip for the belt is rotatable, making the tool easier to manoeuvre.
Multi-function control handle
The multi-function handle on the long-reach hedge trimmers enables all the engine functions to be easily controlled.
Manual fuel pump (purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Shoulder strap / carrying system
Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobsSKU: n/a - Hedge Cutters & Trimmers
STIHL HL 92 C-E Long Reach Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
STIHL Ecospeed
With the ECOSPEED function, you can use your long reach hedge trimmer in a more economical operating mode. Simply turn the wheel to the minus direction, thereby reducing the maximum engine speed. This keeps your long reach hedge trimmer running at partial load; however, despite this limited setting, you can shift to full capacity when necessary by pressing the throttle lever. Operating at partial load reduces fuel consumption and you can work much longer with one tank.
Blade system
Double-sided cutting blades ensure a powerful and precise cut even through thicker branches.
Quick-release adjustment system
The cutter bar can be adjusted in increments up to 145° in two directions. To save space, the cutter bar can be folded parallel to the shaft, and locked, for transport.
Loop handle
The loop handle gives you maximum flexibility and easy operation even in confined working conditions.
Clip
The clip for the belt is rotatable, making the tool easier to manoeuvre.
Multi-function control handle
The multi-function handle on the long-reach hedge trimmers enables all the engine functions to be easily controlled.
Manual fuel pump (purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Shoulder strap / carrying system
Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.SKU: n/a - Hedge Cutters & Trimmers, Tillers
STIHL HS 87 T Hedge Trimmer
Single-sided blades
STIHL hedge trimmers with single-sided blades are ideal for cutting between waist and chest height hedges.
Trimming variation (T)
The T variations of STIHL hedge trimmers provide the perfect trimming and shaping of hedges and shrubs. Thanks to the blade shape with smaller tooth spacing and lower tooth height in conjunction with the gearing for a high stroke rate, more specific shapes can also be achieved.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.ingle lever operation
The choke, start gas, operating position and stop function are integrated onto one operating element. Stop button with a single lever operation After pressing the stop button, the shaft jumps back to position I. The hedge trimmer is ready to start again immediately, thus preventing an incorrect operation.
Single-sided cutting blade
The single-sided cutting blade is ground on one side. The special blade geometry ensures high cutting performance.SKU: n/a - Hedge Cutters & Trimmers, Tillers
STIHL HS 87 R Hedge Trimmer
Single-sided blades
STIHL hedge trimmers with single-sided blades are ideal for cutting between waist and chest height hedges.
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
Cutting variation (R)
The R variations of the STIHL HS 82 and STIHL HS 87 are designed specifically for large volume cutting. They feature a cutting blade with wide tooth spacing and longer tooth height. The gearing allows a high cutting power at a medium stroke rate. The R variations provide the possibility of cutting thicker branches and completing clearing work faster.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Single-sided cutting blade
The single-sided cutting blade is ground on one side. The special blade geometry ensures high cutting performance.Accessories
Tip protector – hedge trimmers
Protects the tip of the hedge trimmer’s cutting blade from wear and tear while working in contact with the ground
Catcher plate for cutter blades
Practical catcher plates for catching and removing cuttingsSKU: n/a - Hedge Cutters & Trimmers, Tillers
STIHL HS 82 T Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
Double-sided blades
Dual ground blade system provides a clean cut. Excellent for cutting stronger, thicker branches.
Trimming variation (T)
The T variations of STIHL hedge trimmers provide the perfect trimming and shaping of hedges and shrubs. Thanks to the blade shape with smaller tooth spacing and lower tooth height in conjunction with the gearing for a high stroke rate, more specific shapes can also be achieved.
Swivelling multi-function handle
The handle rotates by 90° to the left and right, ensuring the best cutting position at all times.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Suspension lug in handle
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Single lever operation
The choke, start gas, operating position and stop function are integrated onto one operating element. Stop button with a single lever operation After pressing the stop button, the shaft jumps back to position I. The hedge trimmer is ready to start again immediately, thus preventing an incorrect operation.
Double-sided cutting blade
The cutting blade is double sided. The sophisticated blade geometry makes for a job well doneAccessories
Protects the tip of the hedge trimmer’s cutting blade from wear and tear while working in contact with the groundSKU: n/a - Hedge Cutters & Trimmers, Tillers
STIHL HS 82 RC-E Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
Double-sided blades
Dual ground blade system provides a clean cut. Excellent for cutting stronger, thicker branches.
Cutting variation (R)
The R variations of the STIHL HS 82 and STIHL HS 87 are designed specifically for large volume cutting. They feature a cutting blade with wide tooth spacing and longer tooth height. The gearing allows a high cutting power at a medium stroke rate. The R variations provide the possibility of cutting thicker branches and completing clearing work faster.
Swivelling multi-function handle
The handle rotates by 90° to the left and right, ensuring the best cutting position at all times.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Suspension lug in handle
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Double-sided cutting blade
The cutting blade is double sided. The sophisticated blade geometry makes for a job well doneSKU: n/a - Hedge Cutters & Trimmers, Tillers
STIHL HS 56 C-E Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
Tip protection
The comfort variants HS 46 C and HS 56 C come with tip protection as standard, which prevents damage to both the blade and the gear, but also to things that lie near the hedgerow (e.g. natural stone wall). It also makes it easier to cut ground cover plants.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Single lever operation
The choke, start gas, operating position and stop function are integrated onto one operating element. Stop button with a single lever operation After pressing the stop button, the shaft jumps back to position I. The hedge trimmer is ready to start again immediately, thus preventing an incorrect operation.
Double-sided cutting blade
The cutting blade is double sided. The sophisticated blade geometry makes for a job well doneSKU: n/a - Hedge Cutters & Trimmers, Hedge Trimmer Double Sided, Tillers
STIHL HS 46 C-E Hedge Trimmer
STIHL 2-MIX-Engine
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
Tip protection
The comfort variants HS 46 C and HS 56 C come with tip protection as standard, which prevents damage to both the blade and the gear, but also to things that lie near the hedgerow (e.g. natural stone wall). It also makes it easier to cut ground cover plants. Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Single lever operation
The choke, start gas, operating position and stop function are integrated onto one operating element. Stop button with a single lever operation After pressing the stop button, the shaft jumps back to position I. The hedge trimmer is ready to start again immediately, thus preventing an incorrect operation.
Double-sided cutting blade
The cutting blade is double sided. The sophisticated blade geometry makes for a job well doneSKU: n/a - Brush Cutter, Handhelds
STIHL FR 460 TC-EFM Backpack Brushcutter
STIHL E-Start (F)
The STIHL Electro-Start system allows you start the tool at the push of a button. There is no need to remove the machine from your back to start it up, saving time and energy. The pull start is still available for cold starting.
STIHL 2-MIX engine with stratified charge system
The STIHL two stroke engine with 2-MIX technology ensures a high power output and excellent torque levels while reducing fuel consumptioon by up to 20%*. It combines a four-channel cylinder with a stratified charge system. Exhaust emissions are also lowered by up to 70%*. The engine is compliant with EU II European emissions standard. (*Compared with STIHL 2-stroke engines of the same power output without 2-MIX technology. Percentages may vary depending on model.)
STIHL ErgoStart (E)
Easy starting is achieved by an additional spring between the crankshaft and the starter cord reel. One smooth, steady pull is all it takes for reliable starting of power tools fitted with STIHL ErgoStart. Standard with all CE models.
Anti-vibration system
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
Shoulder strap / carrying system
Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.
Loop handle (R)
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Detachable shaft
The shaft can be detached without the use of tools for easy storage and transport.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator’s hand never leaves the handle.
Compensator
A controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occursSKU: n/a