Mountfield MMT 2605 (5 in 1) Petrol Multi-Tool


If you are serious about gardening, then you need this piece of kit! The MM2605, 5-in-1 multi-tool is powered by a two-stroke engine, there are 5 tools in one resulting in space-saving in your shed or garage. All your trimming and pruning needs are catered for in one product. It’s genius.

  • Easy start 25.4cc 2-stroke petrol engine
  • Tap & Go nylon head and 3 toothed metal blade grass trimmer attachments
  • 40cm Hedge Trimmer attachment
  • 25cm pole pruner attachment
  • 70cm Extension pole
  • Single harness

£319.00 £379.00

The versatile 5 in 1 Multi-Tool is powered by a two-stroke engine. After mixing petrol and oil at a ratio of 40:1, the only head-scratching will be deciding which tool to fix and use first.
You have a choice: use the Tap & Go nylon head for grass trimming; the 3 toothed metal blade for cutting those scratchy brambles and other rough vegetation; trim up your hedges with the 43cm hedge trimmer dual action laser-cut blades; use the 25cm pole pruner chainsaw head to clear a few low branches or fit the 70cm extension pole to reach even higher.

It’s easy to swap heads, the MM2605 5 in 1 is comfortable using the single harness (included) and each and every tool is effective. It’s just a pity that there isn’t a built-in Thermos flask carrier. You can’t have everything. You can have a two-year warranty though.

Product Dimensions with various attachments
• Length of Unit as a Pole Pruner – 207cm
• Length of Unit as a Pole Pruner with extension pole – 277cm
• Length of Unit as a Hedge Trimmer – 226cm
• Length of Unit as a Hedge Trimmer with extension pole – 296cm

For advice on the garden tool best suited to your requirements please call our Technical Helpline on 0800 669 6325 or contact your local Mountfield Dealer who will be happy to advise you.

Weight16 kg


Power sourcePetrol 2-stroke
Power0.7 kW
Displacement25.4 cm³
Engine rotation speed11000 rpm
Maximum engine speed11000 rpm
Idling speed (+/- 100)3100 rpm
StarterEasy start recoil
Fuel tank capacity0.65 l
Carburettor typeRotary valve
Ignition coil typeAnalogic
Air filter typeSponge
Maximum working area0 m²
Nylon line diameter (millimeter)2,4
Cutting width43 cm
Cutting length
40 cm
Blade length43 cm
Nylon head typeTap & Go dual line
Nylon line length
4 m
Blade typeDual action – Laser cut
Teeth distance25 mm
Blade diameter (brushcutter)
255 mm
Blade type (brushcutter)
3 T
Blade rotation angle180 °
Bar typeSprocket nose
Bar length25 cm
Bar length (inches)10 in
Chain type3/8″ .050″ (91PJ-40X)
Chain speed5.2 m/s
Chain oil tank capacity0.12 l
Chain oil pumpAutomatic
Chain tensioning systemFront screw tensioning
Handle typeLoop
Vibe Control System (VCS)Yes
Shaft tube diameter
26 mm
Inner shaft diameter8 mm
Brushcutter attachmentYes
Hedger attachmentYes
Soft grip handleYes
Shaft extension
70 cm
Pruner attachmentYes
Included tools kitSpark plug key, screwdriver
Hedger guaranteed sound power level (LwA) dB(A)
Hedger measured sound pressure level at operator ear (LpA) dB(A)
Pruner guaranteed sound power level (LwA) dB(A)
Pruner measured sound pressure level at operator ear (LpA) dB(A)97,8
Pack weight15.98 kg
Product weight (brushcutter version)
8.2 kg
Product weight (hedger version)9.2 kg
Product weight (pruner version)
8.9 kg
Product weight (trimmer version)8.4 kg
Product length1860 mm
Product width385 mm
Product height
340 mm
8.2 kg