Kilworth Volcan K105 SDT RS Tractor

The Volcan is the largest All Terrain Tractor within the BCS range. It has the reverse drive system as standard and is available with a choice of 3 engines up to 92HP. Although engine power is high, the tractor remains compact and weighs only approximately 2150kg with the optional cab. It is suitable for a range of tasks from estate maintenance and forestry through to contract mowing on roadside verges and embankments

Specification

Weight	2700 kg
Brands	KILWORTH

Brand	Kilworth
Engine	KUBOTA V3800 CR-TE4
Number of cylinders	4 in-line
Displacement (cm³)	3769
Intake	Turbo
Fuel system	Direct injection “Common rail”
Emission level	Stage 3B
Balancing	Counter-balance shafts
Power (kW/HP)	72.1 / 98
Rated speed (rpm)	2,400
Maximum torque (Nm/rpm)	330 / 1,500
Speed management	Electronically regulated with a consolle with functions: increase and decrease of engine speed, memorize and recall a particular speed or switch off the electronic throttle and go to the minimum idle speed
Cooling	Liquid
Tank capacity (lt)	70 lt (version with roll-bar) – 54 lt (version with cabin)
Chassis	Swinging integral chassis OS-FRAME with steering wheels
Drive	Four-wheel drive. Front-wheel drive disengagement with electro-hydraulic control
Transmission	32 speeds synchronized gearbox: 16 FWD and 16 REV with synchronized reverser
Power Shuttle Easydrive (Optional)	Electro-hydraulic power shuttle electronically actuated with the lever (with 3 position FWD-N-REV) installed on the left of steering wheel. Possibility to choose from 5 levels of reactivity
Transmission clutch	Multidisc in oil bath electronically-managed and proportional hydraulic control with PRO-ACT System
Differential	Front and rear. Differential lock: front and rear simultaneously or only rear with electro-hydraulic control
Axles	Front with epicyclic reduction units and rear with bull-gear units. Front axle, oscillating in the middle (approx. ±15°)
Rear PTO	Independent from the gearbox and synchronized with forwarding speed. Engageable under load with brake in disengaged position
PTO Clutch	Multidisc in oil bath with electro-hydraulic control
PTO rotation speed (rpm)	Standard: 540/540E – Optional: 540/1,000
Hydraulic System	Double circuit with independent pumps and heat exchanger
Flow rate to the hydroguide and the electro-hydraulic controls (lt/min)	33
Flow rate to the lift and the control valves (lt/min)	30 (optional oversized pump with flow rate 49 lt/min)
Maximum hydraulic pressure (bar)	180
Rear Control Valves	Mechanical control
Standard	2 double acting
Optional and in addition to the standard ones	1 single acting and 1 double acting or 1 double acting and 1 double acting with float
Joystick (optional)	With proportional electronic control of lifts and control valves consisting of: 1 single acting with adjustable flow and free return, 3 double acting (replacing the standard ones) and oversized pump 49 lt/min. Potentiometer to change the sensibility of the joystick
Front Control Valves (Only with Joystick)	4 double acting, 1 single acting and 1 single acting with adjustable flow and free return with E-Plug System
Electric System	Battery 100 Ah / 12 V – Alternator 95 A
Rear power outlets	7 pin and 3 pin
Rear Lift	Standard: by two external rams Optional: position and draft control
Three-point hitches	Standard: standard couplers cat. 1 and 2. Optional: quick couplings cat. 1 and 2, arms with non-adjustable length or quick couplings, L-shaped, cat. 1 and 2, arms with adjustable length and hooks with adjustable width
Three-point tie bar	Standard: with manual adjustment – Optional: hydraulically controlled upper link and tie rod link arm
Ball joint lifting capacity (kg)	2,700
Front Lift (Optional)	With front protection and 2 double acting control valves with free return
Three-point hitches	Rigid with quick couplings cat. 1
Lifting capacity (kg)	800
Driving Platform	Monodirectional with platform suspended on silent block. Suspended pedals mounted on control column
Steering wheel	With adjustable inclination
Seat with gas spring for easy tipping and safety belt	Standard: comfortable sprung seat, adjustable according to the driver’s weight – Optional: “Kab Seating” or pneumatic seat
Service Brakes	Oil bath discs with hydrostatic control, acting on the four wheels
Parking brake	Standard: acting on the rear transmission, with hand lever – Optional: automatic and indipendent Brake-Off with knob on the dashboard
Steering	Hydrostatic steering acting on the front wheels
Safety	Standard: front homologated roll-bar
Cabin (Optional)	Compact AIRTECH version, pressurised and homologated cat. 4. Sound-proof with monocoque body fitted on silent-block, beacon lamp and fabric covered seat. Safety cell integrated in the structure, instrument panel and air ducts (car type). Air conditioning system and Brake-Off
Instrument Panel	With multi-function colour and digital display complete with: hour counter, battery voltage, fuel consumption, DPF level, simultaneous reading of engine speed, forwarding speed and PTO speed. Warning lights and acoustic alarm
Standard Tyres	260/70R16*300/70R20
Optional Tyres	260/70R16340/65R20 – 280/70-18360/70R20 – 280/70-18320/70R24 – 320/65R18380/70R20 – 340/65R18*420/65R24
Standard Tow Hooks	Rear CUNA and front
Optional Tow Hooks	Rear tow hook: EC approved or EC approved (Slider type) or CUNA (Slider type)
Weight With Roll-Bar (kg)	2,520
Weight With Cabin (kg)	2,700
Optional	Front bumper, Beacon lamp, Front weight, Weights for front wheels, Cast-iron rim flanges for rear wheels 24”, Front plate for implements connection, Active carbon filter for pressurised cabin